Model Number: KVIEW100
The KVIEW100 can Accept and Power Eight 4-20 mAdc Analog Signals and Two Pulse Inputs. The KVIEW100 Offers the Ability to Display up to Eight Channels in Engineering Units with Corresponding Bargraphs. The Bargraphs can be Independently Scaled to Any Engineering Units.
Model Number: KVIEW10
The KVIEW10 can Accept and Power Four 4-20 mAdc Signals and Two Pulse Inputs. The KVIEW10 Offers the Ability to Display Two Channels in Engineering Units with their Corresponding Bargraphs. The Bargraphs can be Independently Scaled to Engineering Units.
Model Number: DPM 100
The DPM100 is a Programmable Microprocessor-Based Process Monitor with Digital Display. The Device may be Used to Provide a Digital Indication of an Analog Process Signal and Two Configurable Contact Outputs for Actuating Alarms and/or Logic Control Functions. The DPM100 Requires 100 VAC, 220 VAC or 12 to 24 VDC Power for Operation.
Model Number: CP2
The CP2 Conductance Level Switch can be Used in Liquid Applications, such as High or Low Level Alarm, Interface, Slurries, Flow / No Flow, Liquid / Foam Interface, Foams, Conductive Products, Non-Conductive Products, Organic and Inorganic processes.
Model Number: A22
The A22 Speed Switch precisely monitors rotating equipment and provides an output for “loss of speed”. The unit’s total package includes power supply, adjustable speed setting, 10 second delay, latching output relay, magnet, and explosion proof enclosure. The unit is highly accurate in spite of its low purchase and installation cost. Simple calibration allows the unit to monitor from 2 to 250 RPM (Optional 200 to 1000 RPM).
Model Number: SoliTrak
The Model SoliTrak is an Electro-Mechanic Level Measuring Instrument for the Continous Measuring of Level in Hoppers, Silos or Tanks. This Top Mounted System is used for Monitoring the Level in Applications, such as Powders, Small Grain Bulk Materials or Coarse Grain Bulk Materials. A Bob Weight is Mounted at the End of a Measuring Rope or Tape, which is Wrapped on a Motor Driven Rope Roller. Upon Contact with the Bulk Material, the Bob Weight Returns and is Drawn Back to its Upper Stop Position.
Model Number: RPMRI
K-Tek Rotary Paddle Motor Retrofit Kits are a drop-in replacement for Bindicator heavy duty or standard motor units.
Model Number: RotaryPoint
The RotaryPoint’s Durable, Rugged Design in Compatible with many Bulk Solids, Pelletized and Granular Applications. The RotaryPoint Rotating Paddle Switch can be Used for Level Indication of Materials with Densities of 10 lbs/ft³ and Greater. The RotaryPoint is Ideal for Installations where Almost Any Dry Bulk Material is Contained in Hoppers, Silos, Bins and Tanks.
Model Number: ShieldPoint 300
The ShieldPoint 300 RF Capacitance Switch is Available with Sensing Probes and Single Setponit Electronics. The ShieldPoint 300 is Used in Bulk Solids and Liquid Applications, such as Pellets, Granules, Powders, Slurries, Flow / No Flow, Conductive Products and Interface.
Model Number: A75
The A75 RF Level Switch is Used in Dry Bulk and Liquid Applications and Special Applications, such as, High Temperature, Corrosive Environments, High Pressure and Special Probe Materials.